HCP - Sewage Pump


AF-08	AF-15A	AF-35	AF22-37-55-75	AF-610

	International standard design: VCT and 2PNCT cable, auto-cut, dry-motor, silicon carbide mechanical seal, high grade cast iron, good quality and performance.
	Multiple impellers options, there are three kinds of impellers (P/U/E type) to handle different sewage and waste water.
	Strong abrasion resistant mechanical seal made of silicon carbide to ensure the best seal effect.
	For extra protection, an oil-seal ring has been installed under the oil chamber. This lip seal help to prevent silt and sand to get into the lower seal.
	Full range from low head to high head, compact and easy installation, available with TOS system which makes it easy to automatically connect and disconnect from above the pits by means of guide rail system.
	Auto cut
	Equipped with automatic reset motor protector, prevent motor from burning due high temperature/phase failure/voltage drop and lock impeller
	Cable base
	Epoxy resin seal cable base to prevent water intrude into motor through the core wire.

	Drainage of waste water from the liberation tank, purifying tank and sewage tank in water treatment plant.
	Drainage of waste water and inclusion containing fibrous admixtures from leather factory, dyeing factory and food processing factory.
	Sewage management, accumulated water,septic tank, stock farm.
	Pumping sewage from single and multi-family dwellings.
	Pumping sewage from hotels, restaurants, schools and public buildings.

Diameter(mm)			50 . 80 . 100 . 150
Pumping liquid	Liquid temp		0~40^oC
	Liquid nature		Waste water and sewage
	Max depth		30m
Pump	Structure	Impeller	P type：Semi-open, Non-clog
			U type：Semi-Vortex, E type：Enclosed single channel
		Mech seal	Double mechanical seal
		Bearing	Ball type bearing
	Material	Upper cover	FC-200
		Casing	FC-200
		Impeller	FC-200/FCD-450
		M.seal	Sic/Sic
Motor	Type		Dry motor
	Polarity		2P(1~5HP)	4P(3~10HP)
	Insulation		B Class(5HP;F Class)	F Class
	Frequency		50Hz
	Auto-cut		Automatic reset motor protector
	Material	Frame	FC-200
		Main shaft	SUS420J2(2P：SUS403)
		Cable	VCT(Over 5HP：2PNCT)

MULTIPLE IMPELLERS OPTION TO SOLVE
THE DRAINAGE PROBLEM OF WASTE WATER.


P TYPE IMPELLER	U TYPE IMPELLER	E TYPE IMPELLER
Semi-open impeller embedded with a tungsten blade to enable cutting of fibrous materials to prevent clogging on higher discharge applications.	Vortex impeller produces a hydraulic passage through the pump for long fibrous material, without passing through the impeller and prevent the potential clogging.	Channel impeller- Effective for drainage and higher head generation with liquids containing solids.

Remark:Pump of U type impeller(3 phase)operating in a higher current when reverse, please Adjust into fit dlections.